Installing The Printer Driver Using Ieee 1394 - Ricoh 2238 Operating Instructions Manual

When installation is complete, the
printer with its port directed to
"USB00n" appears in the [Printers]
*1
folder. ("n" is the number of
printers connected.)
*1
In Windows XP and Windows
Server 2003, the folder is [Printers
and Faxes].
Mac OS - Creating a desktop printer icon
When you connect the machine and
your computer using USB 2.0, create a
Desktop Printer icon.
Limitation
❒ In Mac OS X Native mode, print-
ing is disabled when connected to
the machine using USB.
A A A A
Double-click [Desktop Printer Utility]
in the [AdobePS Components] fold-
er.
B B B B
Select [AdobePS] in [With:] and
[Printer (USB)] in [Create Desktop],
and then click [OK].
C C C C
Click [Change] in [USB Printer Selec-
tion].
D D D D
Select the model of the machine
you are using in [Select a USB Print-
er:], and then click [OK].
E E E E
Click [Auto Setup] in [PostScript
Printer Description (PPD) File].
F F F F
Click [Create].
G G G G
Enter the machine name, and then
click [Save].
The printer icon appears on the
desktop.
H H H H
Close the Desktop Printer Utility.
Installing the Printer Driver
Using IEEE 1394
Printing using a SCSI print device
with the optional IEEE 1394 interface
board is possible under Windows
2000/XP, or Windows Server 2003.
Preparation
Make sure that all other applica-
tions are closed and the computer
is not printing before installation.
Important
❒ When the printer driver is being
installed, do not turn on the power
of other printers connected to the
same bus, or connect another IEEE
1394 device.
❒ Before uninstalling the printer
driver, be sure to disconnect the
IEEE 1394 interface cable from the
computer.
❒ SCSI print must be enabled using
the display panel. See "Interface
Settings/IEEE 1394", Network
Guide.
❒ SCSI print using the optional IEEE
1394 interface board is not sup-
ported by Windows 95/98/Me, or
Windows NT 4.0. If the "plug and
play" function starts, click [Cancel]
TM
in the [New Hardware Found] or [De-
vice Driver Wizard] dialog box.
Note
❒ If [Found New Hardware Wizard] ap-
pears every time the computer is
started or the cable is connected
with Windows 2000/XP or Win-
dows Server 2003 when the printer
function that uses SCSI print is not
installed, disable the device. See
p.37 "Disabling the Device" for
more information.
Installing the Software
35
2