Ricoh CL2000 Operating Instructions Manual page 511

E E E E
The software license agreement appears in the [License Agreement] dialog box.
After reading through the content, click [I accept the agreement.] to agree with the license agree-
ment, and then click [Next>].
F F F F
In the [Select Program] dialog box, select the printer drivers you want to use, and then click
[Next>].
You can select more than one printer driver.
G G G G
Select the [Printer Name] check box for the model(s) of printer you want to use.
To change the printer name, use the [Change settings for 'Printer Name'] box.
H H H H
Double-click the printer name to display its settings.
Note
The details shown for [Comment], [Driver], and [Port] vary depending on the operating system be-
ing used, model of printer selected, and port being used.
I I I I
Confirm that [LPT1:] is shown for [Port].
J J J J
Configure the user code and default printer as necessary.
User Code
The procedure to specify the user code may differ depending on the printer language.
• RPCS
You can specify the user code when installing the printer driver. You cannot register or edit
the user code from the printer driver dialog box. To change the user code, you must uninstall
the printer driver, and then register the new user code during the re-install process.
• PCL 5c/PostScript 3
You can specify the user code with the Printer Driver Properties after installing the printer
driver. See the printer driver's Help.
Operating Instructions Client Reference
45