Formatting The Printer Hard Disk Drive - Ricoh CL2000 Operating Instructions Manual

Options
Reference
For more information about
printing the configuration page,
see "Making Printer Settings
1
with the Control Panel", Admin-
istrator Reference.
Important
❒ Before using the new Printer
Hard Disk, you must make the
settings in the printer driver.
Formatting the Printer Hard
Disk drive
If it becomes necessary to format the
Printer Hard Disk after initial setup,
execute "HDD Format" in the Mainte-
nance menu.
Important
❒ Formatting the Printer Hard Disk
will delete all data.
A A A A
Press the { { { { Menu} } } } key.
"Menu" appears on the panel dis-
play.
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Maintenance", and then
press the { { { { Enter #} } } } key.
Menu:
Maintenance
C C C C
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "HDD Format", and then
press the { { { { Enter #} } } } key.
A message to start to format is
shown.
17
Note
❒ If "HDD Format" is not dis-
played on the panel display, the
Printer Hard Disk is not in-
stalled properly. Reinstall it
A
from step . If you cannot in-
stall it properly even after the
reinstallation, contact your sales
or service representative.
Important
❒ Do not turn off the power while
formatting the Printer Hard Disk
to avoid a printer malfunction.
D D D D
Press the { { { { Enter #} } } } key.
The Printer Hard Disk is format-
ted, and a message to restart the
printer is shown.
E E E E
Turn off the power, and then turn
it back on.
Formatting the Printer Hard Disk
is completed and it is enabled to
use.