NetWare 4.x, 5/5.1, 6/6.5 - Advanced Settings
The procedure for configuring the printer differ depending on whether the network interface board is
configured as a print server or remote printer. This section describes how to configure it in a NetWare
4.x, 5/5.1, 6/6.5 environment.
To use NetWare 5/5.1, 6/6.5
• Use the printer as a print server.
Do not use as a remote printer.
• If you use Pure IP, configure the printer to use TCP/IP. For more information about how to make
the settings, see
Operating Instructions
p.75 "Configuring the NetWare Protocol using the Control
Administrator Reference
Panel".
87