Setting Up As A Remote Printer - Ricoh CL2000 Operating Instructions Manual

Setting Up as a Remote Printer

A A A A
Log on to the file server as an Admin or the equivalent of an Admin.
B B B B
Run the SmartDeviceMonitor for Admin.
C C C C
On the [Group] menu, point to [Search Device], and then click [IPX/SPX].
A list of printers appears.
Note
If you cannot identify which printer to configure from the list of printers, print the configuration
page and find it. For more information about printing the configuration page, see
a Configuration
If no printer name appears on the list, match the IPX/SPX frame types between the computer
and printer. Use the [Network] dialog box of Windows to change the computer frame type. For
more information about changing equipment frame types, see
Protocol using the Control
D D D D
Select the printer you want to configure, and then click [NIB Setup Tool] on the [Tools] menu.
E E E E
Click [Property Sheet], and then click [OK].
F F F F
Click the [NetWare] tab, and make the following settings:
A In the [Print Server Name] box, enter the name of the print server.
B In the [File Server Name] box, enter the name of the file server in which a print server is to
be created.
By clicking [Browse], you can select a file server among those listed in the [Browse] dialog box.
Operating Instructions
Page".
Panel".
Administrator Reference
p.134 "Printing
p.75 "Configuring the NetWare
92