Paper Input - Ricoh CL2000 Operating Instructions Manual

A A A A
Open the Bypass Tray.
B B B B
Extend the Bypass Tray.
C C C C
Slide the side guides outwardA A A A ,
and then load paper until it stops
with the print side down B B B B .
D D D D
Adjust the side guides to the pa-
per width.
ZHBY070E
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
❒ Shuffle the paper before loading
the stack onto the tray so multi-
ple sheets are not fed in at the
same time.
E E E E
Set the paper size using the con-
ZHBY080E
trol panel as follows:
A Press the { { { { Menu} } } } key.
"Menu" appears on the panel
display.
B Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Paper Input", and then
press the { { { { Enter #} } } } key.
Menu:

Paper Input

C Confirm that "Bypass Size" is
displayed, and then press the
{ { { { Enter #} } } } key.
ZHBY090E
Paper Input:
Bypass Size
Loading Paper
2
ZHBY100E
25