5. Monitoring and Configuring the Printer
Getting Printer Information over the Network
This section explains details of each item displayed in the printer status and information.
Current Printer Status
The printer status can be checked using the following commands:
• UNIX: Use the "lpq" command and "rsh", "rcp", "ftp" and "sftp" parameters.
• mshell: Use the "status" command.
Access Restricted
5
Add staples (Booklet: Back)
Add staples (Booklet: Both)
Add staples (Booklet: Front)
Adjusting...
Call Service Center
Canceled
Canceling Job...
Configuring...
Cooling Down Fusing Unit...
Cover Open: Duplex Unit
Cover Open: Duplex Unit Left
Cover Open: Duplex Unit Right
Cover Open: Finisher
Cover Open: Finisher Front
Cover Open: Front Cover
224
Messages
Description
The job was canceled because user have no au-
thority.
The staple of booklet finisher (back) is exhaust-
ed.
The staple of booklet finisher is exhausted.
The staple of booklet finisher (front) is exhausted.
The printer is initializing or calibrating.
There is a malfunction in the printer.
The job is reset.
The job is being reset.
Setting is being changed.
Fusing unit is cooling down.
The cover of the duplex unit is open.
The left cover of the duplex unit is open.
The right cover of the duplex unit is open.
The cover of Finisher is open.
The front cover of Finisher is open.
The front cover is open.