Remote Maintenance By Telnet; Using Telnet - Ricoh Priport DX 4640PD Network Manual

Appendix

Remote Maintenance by telnet

You can view printer status and configure the network interface module using
telnet.
Note
❒ You should specify a password so only the network administrator, or a per-
son with network administrator privileges, can use remote maintenance.
❒ The password is the same as that used for configuring the network interface
module with a Web Image Monitor.
❒ If you change a password using remote maintenance, the other passwords are
also changed.

Using telnet

Follow the procedure below to use telnet.
Limitation
❒ Only one person at a time can be logged on to do remote maintenance.
A
Using the machine's IP address or host name, start telnet.
% telnet IP_address
Note
❒ In order to use the host name instead of the IP address, you must write it
to the hosts file.
B
Enter the password.
9
Note
❒ The default is "password".
C
Enter a command.
Reference
For details about telnet commands, see p.77 "Commands List".
D
Quit telnet.
msh> logout
When the configuration changes, a message asks whether the changes should
be saved or not.
E
Enter "yes" to save the changes, and then press the {ENTER} key.
If you do not want to save the changes, enter "no", and then press the {EN-
TER} key. If you want to make additional changes, enter "return", and then
press the {ENTER} key.
76