Paper Recommendations; Loading Paper; Storing Paper; Types Of Paper And Other Media - Ricoh SP6330 Hardware Manual

5. Paper and Other Media

Paper Recommendations

Loading Paper

• Do not use ink-jet printer paper because it may stick to the fusing unit and cause a paper misfeed.
• When printing on OHP transparencies that have a print side, load them with the print side facing up
on the bypass tray. Not taking this precaution may cause them to stick to the fusing unit and cause
misfeeds.
• Set the paper as described below.
• Tray 1: Print side facing down
• Bypass Tray: Print side facing up
5
• Paper Feed Unit (Tray 2, Tray 3): Print side facing down
• Print quality cannot be guaranteed if paper other than the ones recommended is used. For more
information about recommended paper, contact your sales or service representative.
• Do not use paper that has already been printed onto by other printers.

Storing Paper

• Paper should always be stored properly. Improperly stored paper might result in poor print quality,
paper misfeeds, or printer damage. Recommendations are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.

Types of Paper and Other Media

Plain Paper
Paper thickness
Printer setup
88
2
60 - 105 g/m (16 - 28 lb.)
Make the following setting using the control panel:
Select [Paper Input] [Paper Type: (tray name)]
(Plain Paper)].
[No Display