Saving Your New Configuration - Printronix p4280 Setup Gudie

Saving Your New Configuration

Save Config.
On Disk
A
B
C
D
Defaults
You can save up to four different configurations to meet four unique print job
requirements. For example:
The configurations are stored on the operating system diskette—they will not
be lost if you turn off the printer. Later, when you turn on the printer, the last
used configuration will be loaded.
NOTE: If you do not save the configuration before you turn off the printer,
Step
1.
Open the printer cover.
2.
Press: START
STOP
3.
PREV
4.
3–28
Config. A: Selects Draft print quality,10 cpi, 6 lpi, etc.
Config. B: Selects NLQ print quality, 12 cpi, 8 lpi, etc.
the current configuration will be lost.
Press
PGM ALT
+
UNTIL
Result
OFF LINE
ENTER SWITCH
NOT LOCKED
SAVE CONFIG
ON DISK
Notes
The unlocked state
allows you to make
configuration changes.
You MUST press PREV.
Configuring the Printer