Set Mode; Voice Synthesizer - Icom IC-775DSP Instruction Manual

SETMODE 5
li H-set mode
(1) Confirmation beep "bEEP"
A beep sounds each time a switch is pushed for
confirmation. This confirmation beep can be turned
Or
HE EP
OFF for silent operation.
Confirmation beep ON (default)
Beep tone volume can be adjusted. (p. 60)
qr bf
Confirmation beep OFF
(2) Voice synthesizer "SPEECH"
The transceiver announces the main readout fre-
quency and mode in English or Japanese when an
optional UT-66 VOICE SYNTHESIZER UNIT is in-
stalled. Speech can be selected as slow or fast in
this item. Announcement volume can be adjusted
with [MONI GAIN] and [AF].
After installing an optional UT-66, pushing
[SPEECH] announces the operating frequency and
pushing a mode switch announces the selected
mode.
- "CW-R" mode is announced as CW.
- "DATA" mode is not announced.
Slower Japanese
Faster Japanese
(3) Auto tuning step function "tS-Aut'
When selecting AM or FM, the quick tuning step is
automatically selected by the auto tuning step func-
|
: -Au E
- Auto tuning step OFF
(4) Scan resume "SC-rES"
You can select scan resume or cancel for when an
operating scan detects a signal.
When selecting. resume (ON), the scan pauses 10
sec. on the detected signal, then it resumes. If the
signal disappears while the scan is paused, the scan
When selecting cancel (OFF), the scan stops and
turns OFF after detecting a signal.