Icom IC-775DSP Instruction Manual page 43

Mi Memory keyer (continued)
e Programming the keying speed
While the memory keyer is activated, pushing [4], [5]
or [6] transmits memory contents 1, 2 or 3 at the
programmed speed, respectively. Each key memo-
rizes the [KEY SPEED] setting independently.
@ Activate the memory keyer.
- "—" blinks.
@ Push [4], [5] or [6] for 2 sec. to program the [KEY
SPEED] setting into keys 4, 5 or 6, respectively.
- 3 beeps may sound.
ll Repeater operation
A repeater amplifies received signals and retrans-
mits them at a different frequency. When using a
repeater, the transmit frequency is shifted from the
receive frequency by an offset frequency. A re-
peater can be accessed using split frequency opera-
tion with the shift frequency set to the repeater's
offset frequency.
© Push the desired band key.
(3) Push [FM] to select FM mode.
- When "DATA" appears, push [FM] again.
@ Set the receive frequency (repeater output fre-
quency). (p. 25)
© Activate the memory keyer.
- "—" blinks.
. " appears.
dial to set the transmit frequency.
I
@ Push and hold [PTT] to transmit.
| Release [PTT] to receive: