E Advanced Tuning Functions En - Icom IC-775DSP Instruction Manual

E Advanced tuning functions
QUICK TUNING STEP
The operating frequency can be changed in kHz
steps (1-10 kHz programmable) for quick tuning.
@ Push [TS] to display the quick tuning indicator.
Quick tuning indicator
CG) Push [TS] again to turn OFF the indicator.
SELECTING THE 1 Hz STEP
The minimum tuning step of 1 Hz can be used for
fine tuning.
1 Hz step indicator
[ AUP]/[V DOWN] SWITCH TUNING
The [AUP]/[VDOWN] switches change the fre-
quency in programmed steps for large frequency
changes. You can set this tuning step from 1 kHz —
1 MHz (in 1 kHz intervals).
mm) [FA
CHANGING THE NORMAL TUNING STEP
- For a 10 Hz step, push MAIN [F-INP][O][.J[1 [TS].
- For a 20 Hz step, push MAIN [F-INP][O][.][2][TS].
- For a 50 Hz step, push MAIN [F-INP][O][.][5][TS].
| AUTO TUNING STEP FUNCTION e
When selecting AM or FM, the quick tuning step is
automatically selected by the auto tuning step func-
tion. This function can be turned ON and OFF as
desired in the H-set mode. (p. 44)
Programming the kHz step
@ Push MAIN [F-INP}].
tuning steps
@ Push MAIN [F-INP].
@ Push [AUP] or [V DOWN]!
sa DEE ECH
O O00000 CH