Table of Contents
Advertisement
20. Click Download Setup to write the new configuration to
the slave unit. The Save Setup dialog box displays.
21. Select the Save Current Setup as User Default
Configuration check box and click OK. The setup
configuration is written to the MVP120. After the setup is
written to the MVP120, it reboots.
22. Check that the Boot LED on the MVP120 is off after the
download is complete. This may take several minutes as
the MVP120 reboots.
23. You are returned to the Main menu.
Your MVP120 is operational at this time.
Repeat the process for each of the slave units. When all
slaves have been configured, go to "Deploying the VOIP
Network."
Deploying the VOIP Network
For a Proprietary Phone Directory database, the VOIP
administrator can deploy the pre-configured slave MVP120s to
their remote sites. The remote site administrators need only
connect power to the pre-configured MVP120, connect the
MVP120 to their Ethernet LAN and predefined telephone
equipment, and then wait for the phone directory database to
be downloaded.
Deploying the VOIP Network
45
Advertisement
Table of Contents
