Multitech MultiVOIP 100 MVP120 Quick Start Manual page 31

You have completed configuration of the Master MVP120.
The voice channel you have set up is labeled Hunt Group
#1. If a call from an H.323 endpoint (a MultiVOIP or a
stand-alone H.323 endpoint) to Phone Number 101 is
unable to be connected, it will automatically connect to the
next available phone number in Hunt Group #1, such as
Phone Number on a Slave MultiVOIP.
5. Add all other phone numbers (Slave units and stand-alone
units) to the Phone Directory database. To add a Channel
of a Slave MultiVOIP, click Add. The Add/Edit Phone
Entry dialog box displays again.
6. Enter the phone number for the Slave MultiVOIP in the
Phone Number box.
7. Click in the Description box. Enter a remote MultiVOIP
phone number description for the Voice/Fax Channel.
8. In the Station Identification group, select Hunt Group #2
from the Hunt Group list, enter the London Office's IP
Address (202.056.039.100), and accept the H.323 industry
standard Port value (1720) used to communicate with
other H.323 endpoints.
Configuring the MultiVOIP
31