Deploying The Voip Network - Multitech MultiVOIP MVP110 Quick Start Manual

Standalone voice/ip gateway

Hide thumbs Also See for MultiVOIP MVP110:

Table of Contents

Introduction

Once all Slave units are configured, the process moves on to

the "Deploying the VOIP Network" section.

Deploying the VOIP Network

The final phase of the installation is deployment of the

network. When the remote MultiVOIPs are sent to their remote

sites, the remote site administrators need only connect the

units to their LAN and telephone equipment. A full Phone

Directory Database Proprietary Phonebook, supplied by the

Master MultiVOIP will be loaded into their units within minutes

of being connected and powered up.

For remote VOIPs that were configured with the Gatekeeper

option enabled, each MultiVOIP will be registered with the

Gatekeeper. The Gatekeeper phonebook directory is NOT

downloaded to the remote units.

Table of Contents

Do you have a question about the MultiVOIP MVP110 and is the answer not in the manual?