Deploying The Voip Network - Multitech MVP200 Quick Start Manual

Repeat this procedure for each of the client units. When all
clients have been configured, proceed with deploying the VOIP
network.

Deploying the VOIP Network

Deploying the VOIP network involves the VOIP Administrator
developing the VOIP Dialing Directory and deploying the pre-
configured client MultiVOIPs to their remote sites. The remote
site administrators need only connect power to the pre-
configured MultiVOIP, connect it to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
Perform the following procedure to deploy your VOIP network.
VOIP Administrator
1. Establish your VOIP Dialing Directory based on your
Phone Directory Database for the numbers to connect the
MultiVOIPs to your VOIP network and the telephone
extension number you need to connect the Voice/Fax
channels. A sample VOIP Dialing Directory is provided
below for your consideration and use.
To call from
2. Send the client MultiVOIPs to their remote sites.
VOIP Dialing Directory
Call Process
Deploy VOIP Network
Dialing
Sequence
37