Deploying The Voip Network - Multitech MultiVOIP 400 MVP400 Quick Start Manual

Deploying the VOIP Network

Deploying the VOIP network involves the VOIP Administrator
developing the VOIP Dialing Directory and deploying the
preconfigured client MultiVOIPs to their remote sites. The
remote site administrators need only connect power to the
preconfigured MultiVOIP, connect it to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
The client units can be another MVP400, MVP800, MVP200,
or a MultiVOIP 100-Series. Therefore, the deployment
procedure for the remote site administrator may be more
general, so you may need to refer to the Cable Connection
Figure in the appropriate Quick Start. Perform the following
procedure to deploy your VOIP Network.
VOIP Administrator
1. Establish your VOIP Dialing Directory based on your
Phone Directory Database for the numbers to connect the
MultiVOIP's to your VOIP network and the telephone
extension number you need to connect the Voice/Fax
channels. A sample VOIP Dialing Directory is provided
below for your consideration and use.
To call from
2. Send the client MultiVOIPs to their remote sites.
VOIP Dialing Directory
Call Process
Software Installation
Dialing
Sequence
41