Multitech MultiVOIP 100 MVP120 Quick Start Manual page 44

MultiVOIP Quick Start Guide
Make certain the Proprietary Phonebook option is
enabled and in the Database Type group, select the Slave
option. The Master IP Address box becomes active.
Note: After you have enabled the Slave option, the Slave
Status button is replaced by the Update button. Once
your Phone Directory database has been created, you can
click this button to refresh the entries in the Phone
Directory Database window.
18. Enter the IP address (204.022.122.118) of the New York
Office MVP120 in the Master IP Address box and enable
the Send Status Report to Master so that status reports
are sent to the Master MVP120.
Note: In a Dial-On-Demand (DOD) network, you should
leave Send Status Report to Master disabled. This
allows the router to disconnect whenever there is no voice
activity. Note that Slaves with Send Status Report to
Master disabled will show up as "Unknown" when viewing
Slave status on the Master.
19. Click OK to return to the Main menu.
44