Deploying The Voip Network - Multitech MultiVOIP 100 (MVP110 Quick Start Manual

Deploying the VOIP Network

Deploying the VOIP network involves the VOIP Administrator
developing the VOIP Dialing Directory and deploying the pre-
configured client MultiVOIPs to their remote sites. The remote
site administrators need only connect power to the pre-
configured MultiVOIP, connect it to their Ethernet LAN and
predefined telephone equipment, and then wait for the phone
directory database to be downloaded.
Perform the following procedure to deploy your VOIP network.
VOIP Administrator
1. Create your VOIP Dialing Directory based on your Phone
Directory Database for the numbers to connect the
MultiVOIPs to your VOIP network and the telephone
extension number you need to connect the Voice/Fax
channels. A sample VOIP Dialing Directory is provided
below for your consideration and use.
VOIP Dialing Directory
Call Process
To call from
2. Send the client MultiVOIPs to their remote sites.
Configure Client MultiVOIPs
Dialing
Sequence
31