Multitech MultiVOIP 100 MVP120 Quick Start Manual page 27

12. Click OK when you are finished.
13. Click OK to download setup.
14. The following dialog box displays.
Click OK to download default setup.
15. After the setup has been written to the MVP120, the unit is
rebooted.
16. Verify that the BOOT LED on the MVP120 is off after the
download completes. This may take several minutes as
the MVP120 reboots.
Note: Since the MVP120 doesn't have a power LED, no
LEDs will be lit if there is no activity after boot up, unless
the ethernet port is connected to the network.
Configuring the MultiVOIP
27