Table of Contents
Advertisement
MultiVOIP Quick Start Guide
Building a Proprietary Phonebook Directory
1. To build your proprietary Phone Directory (in an H.323
environment without the Gatekeeper option enabled), you
will first need to select the Proprietary Phonebook option
and then configure the "Master" MVP120 and then add the
"Slave" MultiVOIPs (or other H.323 endpoints).
Configuring the "Slave" MultiVOIPs is discussed later.
The MultiVOIP, configured as Master, contains the
proprietary phonebook database. All other MultiVOIPs
added to the proprietary phonebook database are
designated Slaves. The Master database contains the
phone numbers of all H.323 endpoints available for
communication on an IP network. This database is
downloaded to each Slave MultiVOIP as it comes online.
2. To configure the Master MVP120, make certain that the
Proprietary Phonebook and Master options are enabled.
The Master IP Address, Send Status Report to Master,
and RAS Parameters group will be disabled.
The Slave Status button displays the Slave VOIP Status
dialog box used for viewing phone number, IP address,
28
Advertisement
Table of Contents
