Configuring Your Slave MVP120s
If the Proprietary Phonebook option on the Phone Directory
Database dialog box was enabled, then you will need to
configure all remote H.323 endpoints as "Slave" units. For
example, the MVP120 at the company's subsidiary office in
London would need to be configured as a "Slave".
CAUTION: If you are installing a MVP120 behind a Firewall,
the Firewall must support H.323. Refer to your Firewall user
documentation to enable H.323 support.
1. Disconnect the PC from the Command port of the Master
MVP120 and connect it to the Command port on the Slave
MVP120.
2. From your desktop, click Programs I MultiVOIP 100 I
MultiVOIP 100 Configuration. The Main menu displays.
3. Click IP to display the IP Setup dialog box.
Configuring MultiVOIP Slaves
35