Table of Contents
Advertisement
Configuring MultiVOIP Slaves
channel interface, voice/fax parameters, Billing/Misc
parameters, and regional telephone parameters for the
channel.
Feature options are enabled or disabled according to the
interface type. The Inter Digit Time option defines the
maximum amount of time that the unit will wait before
mapping the dialed digits to an entry in the Phone
Directory Database. If too much time elapses between
digits, and the wrong numbers are mapped, you will hear a
rapid busy signal. If this happens, it will be necessary to
hang up and dial again. The default is 2 seconds.
6. The Ring Count FXO box enables you to set the number
of rings received before the FXO interface answers the
call. The default setting is 2 rings.
Note: Zero (0) means incoming calls will not be answered.
37
Advertisement
Table of Contents
