Phase 3: Deploy The Voip Network - Multitech MVP200 Quick Start Manual

Phase 3: Deploy the VOIP Network

Phase 3 involves the VOIP Administrator developing the VOIP
Dialing Directory and deploying the pre-configured slave
MultiVOIPs to their remote sites. The remote site
administrators need only connect power to the pre-configured
MultiVOIP, connect it to their Ethernet LAN and predefined
telephone equipment, and then wait for the phone directory
database to be downloaded.
Perform the following procedure to deploy your VOIP network.
VOIP Administrator
1 Establish your VOIP Dialing Directory based on your
Phone Directory Database for the numbers to connect the
MultiVOIP's to your VOIP network and the telephone
extension number you need to connect the Voice/Fax
channels. A sample VOIP Dialing Directory is provided
below for your consideration and use.
To call from
2 Send the slave MultiVOIPs to their remote sites.
VOIP Dialing Directory
Call Process
Deploy VOIP Network
Dialing
Sequence
39