Table of Contents
Advertisement
MultiVOIP Quick Start Guide
4. The Ring Count FXO box enables you to set the number
of rings received on the FXO interface before answering
the call. The default setting is 2 rings.
Note: Zero (0) means no incoming calls will be answered.
For FXO-to-FXO communications, you can enable a
specific kind of FXO disconnect: Current Loss, Tone
Detection, or Silence Detection. Check with your in-
house phone personnel to verify the type of disconnect to
use. If Current Loss is checked, the VOIP will hangup
when it detects a loss of current on the FXO (phone) port.
For tone detection, select from the lists one or two tones
that will cause the line to disconnect. The person hanging
up the call must then press the key or keys that produce
those tones to hangup a call. For silence detection, select
One Way or Two Way, then set the timer for the number
of seconds of silence before disconnect. The default value
of 15 seconds may be shorter than desired for your
application.
5. The Voice/Fax tab displays the parameters for the voice
gain, DTMF (Dual Tone Multi-Frequency) gain, voice
coder, faxing, and advanced features such as Silence
Compression, Echo Cancellation, and Forward Error
Correction.
18
Advertisement
Table of Contents
