MultiVOIP Quick Start Guide
With the Gatekeeper option enabled on the Phone Directory
Database dialog box, all MVP120s are configured as
"Gatekeeper" and cannot be downloaded. In this case, each
MVP120 Phone Book will be programmed with phone
numbers for its own channel. This phone number is registered
with the H.323 Gatekeeper (See the "Registering with a
Gatekeeper Phone Directory" section discussed earlier.)
Remote Site Administrator
The following steps are for MVP120 H.323 endpoints. For non-
MVP120 H.323 endpoints, refer to the appropriate installation
documentation.
1. Connect one end of the power supply to a live AC outlet
and connect the other end to the Power connection on
your MVP120 (See Figure 4).
Vo i c e / F a x C h a n n e l
C o n n e c t i o n
P H O N E
F X O
X F O
P S T N
Figure 4. Remote Site Cable Connection
2. Connect a network cable to the Ethernet (RJ-45)
connector on the back of your MVP120.
46
E T H E R N E T P O W E R
P o w e r C o n n e c t i o n
Ethernet Connection