Table of Contents
Advertisement
Configuring the MultiVOIP
If you want to dedicate a local voice/fax channel to a
remote voice/fax channel (so you will not have to dial the
remote channel number), click the Auto Call Enable
option in the Auto Call group. Then enter the phone
number of the remote channel in the Phone Number box.
11. The Automatic Disconnection group provides three
options to be used singly or in combination.
The Jitter Value defines the average inter-arrival packet
deviation (in milliseconds) before the call is automatically
disconnected. Jitter is the inter-arrival packet deviation
(phase shift of digital pulses) over the transmission
medium that causes voice breakup which can be
particularly disruptive to voice communications. The
default setting is 20 milliseconds. A higher value means
that the voice transmission will be more accepting of jitter.
A lower value will be less tolerant of jitter.
Consecutive Packets Lost defines the number of
consecutive packets that are lost after which the call is
automatically disconnected. The default setting is 30.
21
Advertisement
Table of Contents
