Techman Robot TM25S Series Hardware Installation Manual page 47

1. Plug the TM Screen onto the Robot Stick
along its side tracks.
2. Rotate to tighten both thumb screws on
the back of the TM Screen to make sure
the module are firmly combined with the
Robot Stick.
DANGER:
When using the TM Teach Pendant, it is forbidden to integrate the robot with
Screen/Keyboard/Mouse. This may cause the robot under multi-control situation.
The system integrator is responsible for ensuring that the robot is under only one control
source.
Hardware Installation Manual: TM25S/TM30S series Hardware version: 5.02
TECHMAN ROBOT INC.
5F., No. 58-2, Huaya 2nd Rd., Guishan Dist., Taoyuan City, 333411 , Taiwan
Thumb Screws
Document version: 1.00 47