Media Load Tear-Off (Straight-Through) - Intermec EasyCoder F2 User Manual

Media Load
Tear-Off (Straight-through)
1
Open the side door.
Intermec EasyCoder F2 – User's Guide
The EasyCoder F2 can print on labels, tickets, tags, and continu-
ous stock in various forms. This section describes the case when
the media is torn off manually against the printer's tear bar. This
method is also known as "straight-through printing."
Use the <Feed> key (see fi gure #10) when loading the same
type of media. When switching to a new type of media, or if
the printer does not feed out the media properly, simultaneously
press the <Shift> and <Feed> keys to perform a "testfeed."
Tear-off can be used for:
• Non-adhesive continuous stock
• Self-adhesive continuous stock with liner
• Self-adhesive labels with liner
• Tickets with gaps, with or without perforations
• Tickets with black marks, with or without perforations
An optional label taken sensor can hold the printing of the next
copy in the batch until the present copy has been removed, see
Chapter 9, "Options."
2
Turn the printhead lift lever clockwise to raise
Chapter 4
the printhead.
21