Scanning (Saving To A Computer) - Canon imageCLASS MF266dn II User Manual

Scanning (Saving to a Computer)

Touch Panel Model(P. 242)
5 Lines LCD Model(P. 243)
Touch Panel Model
Required Preparations
● Make preparations such as installing the scanner driver (ScanGear MF) and application (MF Scan Utility) to
the computer used as the save location.
● If the ScanGear MF screen appears on the computer used as the save location, close the screen.
1
Place the original.
2
On the control panel, press [Scan] in the [Home] screen.
➠
The scan type selection screen is displayed.
3
Press [Computer].
➠
The screen to select the computer to be used as the save location is displayed.
When you are using the machine only with a USB-connected computer, the scan screen is displayed.
Proceed to step 5.
4
Select the computer to be used as the save location.
5
Select the scan setting, and press
➠
Scanning of the original starts.
Scanning
You can scan an original and save the scanned data to a computer connected to the
machine. By just operating the machine, you can save scanned data to a computer.
The original is scanned and the data is saved according to the settings of MF Scan
Utility installed on the computer.
Preparing to Save Scanned Data to a Computer(P. 227)
Placing Originals(P. 137)
on the control panel.
242
[Home] Screen(P. 118)
8Y8C-053