Canon imageCLASS MF266dn II User Manual page 75

4
Access the wireless LAN router from a computer, and register the WPS PIN code to
the router.
5
When [Connected.] appears on the control panel, wait a few minutes.
➠
When the machine is connected to the wireless LAN, [
Wait a few minutes. By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 75)
Setting IPv6 Addresses(P. 79)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Select [Close] and press
Setting Up
, and repeat the procedure starting from Step 2.
66
] appears on the [Home] screen.