Canon imageCLASS MF266dn II User Manual page 322

5
Enter the number of copies using the numeric keys.
6
Configure the other copy settings, as needed.
➠
You can adjust the density and image quality and other settings.
7
Press on the control panel.
➠
Copying starts.
● To cancel copying, press [<Cancel>]
● Press on the control panel to view the copy job status.
When [Scan Next: Press Start] appears
When an original is placed on the platen glass and copied using 2-sided copying or N on 1, the screen is
displayed for scanning the next original.
1
Place the next original on the platen glass, and press
➠
The next original is scanned, and the same screen is displayed.
Repeat this process until scanning of all originals is completed.
● You can also press [Density]
original.
2
Press [<Start Copying>] and press
➠
The scanned originals are printed.
Copying
Additional Copying Features(P. 299)
[<Yes>] . Canceling Copy Operations(P. 322)
Viewing the Print Job Status and Log(P. 221)
on the control panel.
and [Original Type]
.
313
to change the settings for each