Canon imageCLASS MF266dn II User Manual page 497

[Low]
[Standard]
[High]
*1
May not be displayed or available depending on the model, the installed options, and other settings.
[Initialize Default Settings]
[Menu] [Function Settings]
Use this to restore the settings to send scanned data via e-mail to the factory settings.
[Link Mobile Device Address Book]
[Menu] [Function Settings]
Specify whether destinations registered in the Address Book on a mobile device can be specified if you are
sending scanned data via e-mail.
Set [Use Remote UI Access PIN] to [On] to require that a PIN be entered when sending destinations from a
mobile device to the machine as the destination. For this, use the same PIN as Remote UI access PIN.
the PIN to Use for Remote UI(P. 387)
[Link Mobile Device Address Book]
[Off]
[On]
[Use Remote UI Access PIN]
[Off]
[On]
[File Settings]
[Menu] [Function Settings]
Specify the operation settings used for saving scanned data to a shared folder.
* [File Settings] may not be displayed depending on the model, the installed options, and other settings.
[Change Default Settings]
[Menu] [Function Settings]
Change the default settings for saving scanned data to a shared folder.
Settings(P. 188)
When you press
values specified here.
[Scan Size]
[A4]
[A5R]
[B5]
[16K]
[LTR]
[LGL]
[STMT]
[EXEC]
[FOOLSCAP/FOLIO]
Settings Menu Items
[Send] [Scan and Send Settings]
[Send] [Scan and Send Settings]
Specifying Destinations (Address Book on a Mobile Device)(P. 186)
[Send] [Scan and Send Settings]
[Send] [Scan and Send Settings]
on the control panel while the file sending screen is displayed, the settings revert to the
[E-Mail Settings]
[E-Mail Settings]
[File Settings]
Changing the Default
488
Setting