Canon imageCLASS MF266dn II User Manual page 268

* If the e-mail address you want to use is not registered in the Address Book, register it, and then select it.
Book Function(P. 167)
[Priority]
Select the priority level.
E-mail Sender
● The e-mail address of the machine becomes the sender e-mail address (From) regardless of the [Reply To]
setting.
● To send the sender's name along with the e-mail address of the machine, use the following procedure to set
the unit name.
Log in to Remote UI
under [Unit Name Settings]
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure
the settings. [Register Unit Name (E-Mail)](P. 486)
● The e-mail sender is the setting shared with the machine.
Scanning
[Settings/Registration]
enter the unit name
259
[TX Settings] [Scan and Send Settings]
[OK].
Address
[Edit]