Adjusting The Volume (For Models With A Fax Function) - Canon imageCLASS MF266dn II User Manual

Adjusting the Volume (For Models with a Fax Function)

You can adjust the volume of sounds emitted by the machine.
You can also set whether the machine emits sounds notifying you of operations and statuses.
Adjusting the Fax Volume(P. 191)
Adjusting Other Fax Function Sounds(P. 191)
Setting the Notification Sounds for Operations and Statuses(P. 192)
Adjusting the Fax Volume
You can adjust the volume of the tone emitted when sending and receiving faxes.
This section describes how to adjust the volume using the control panel.
You can also adjust the volume using Remote UI from a computer.
(Remote UI)(P. 397)
1
On the control panel, press [Menu] in the [Home] screen.
2
[Preferences]
➠
The [Fax Tone] screen is displayed.
3
Drag the slider to the left or right to adjust the volume, and press [Apply].
➠
The volume is adjusted.
● Dragging the slider to the right increases the volume.
● Dragging the slider to the far left mutes the sound.
Adjusting Other Fax Function Sounds
You can adjust the volume of the incoming fax sound and the sounds notifying you when faxes are successfully sent
and received, and when originals are successfully scanned.
You can also configure the setting to emit a sound only when an error occurs.
This section describes how to adjust the volume using the control panel.
You can also adjust the volume using Remote UI from a computer.
(Remote UI)(P. 397)
1
On the control panel, press [Menu] in the [Home] screen.
Basic Operations
[Volume Settings]
Managing the Machine from a Computer
[Fax Tone]
Managing the Machine from a Computer
191
8Y8C-040
[Home] Screen(P. 118)
[Home] Screen(P. 118)