Canon imageCLASS MF266dn II User Manual page 440

[Millimeter/Inch Entry Switch]
[Menu] [Preferences]
Change the units shown on the screen for entering length and width.
[Millimeter]
[Inch]
[Displ. Timing for Cartridge Prep. Notif.]
[Menu] [Preferences]
When the toner in a toner cartridge runs low or the lifetime of the drum cartridge is close to end, a message appears
notifying you to prepare a new toner cartridge or drum cartridge. To manually specify when this message appears (the
toner level in a cartridge or how much the drum is used), specify the timing in [Custom].
When [Auto] is set, the machine automatically decides when to display the message.
Touch Panel Model
[Toner Cartridge]
[Auto]
[Custom]
20 to 99(%)
[Drum Cartridge]
[Auto]
[Custom]
20 to 99(%)
5 Lines LCD Model
[Toner Cartridge]
[Auto]
[Custom]
2 to 20 to 99(%)
[Drum Cartridge]
[Auto]
[Custom]
2 to 10 to 99(%)
[Display IP Address]
[Menu] [Preferences]
Specify whether to display the machine's IPv4 address in the [Status Monitor] screen.
Screen(P. 122)
[Off]
[On]
Settings Menu Items
[Display Settings]
[Display Settings]
[Display Settings]
431
[Status Monitor]