Canon imageCLASS MF266dn II User Manual page 359

Setting the System Manager Information
● On the [Sys. Manager Info Set.] screen, press [System Manager Name] to set the name of the system
manager.
● You can also configure the e-mail address and other system manager information by using Remote UI from
a computer.
- The set information is displayed in [Status Monitor/Cancel]
Checking Usage and Logs with Remote UI(P. 402)
- The set e-mail address becomes the destination that is selected by clicking [Mail to System Manager] on
the Portal page of Remote UI.
Clearing the System Manager ID and PIN Settings
● Clear the entered values of the System Manager ID and PIN, and then press [Apply] with the fields left
empty.
5 Lines LCD Model
1
Press on the control panel.
2
Press [Management Settings]
Manager Information Settings]
➠
The [Sys. Manager Info Set.] screen is displayed.
If the login screen appears, enter the currently set System Manager ID and PIN, then select [<Log In>] and
press . Logging In to the Machine(P. 135)
3
Select [System Manager ID and PIN] and press
4
Enter the System Manager ID, and press
Specify any number. You cannot set a System Manager ID consisting of all zeros, such as "00" or "0000000."
5
Enter the System Manager PIN, and press
Specify any number other than "7654321." You cannot set a PIN consisting of all zeros, such as "00" or
"0000000."
6
Enter the PIN again, and press
➠
The settings are applied.
Security
Portal Page of Remote UI(P. 400)
Control Panel(P. 13)
[User Management]
.
.
350
[Device Information] of Remote UI.
.
.
.
[System