Preparing To Send And Receive Faxes - Canon imageCLASS MF266dn II User Manual

Preparing to Send and Receive Faxes

To send and receive faxes with the machine, you must use the control panel (Fax Setup Guide) to configure the initial
settings. You cannot configure the initial settings using Remote UI from a computer.
(Fax Setup Guide)(P. 100)
When Sending Faxes from a Computer
You must make the necessary preparations on each computer used to send faxes.
Preparing to Send Faxes from a Computer(P. 266)
To Change the Initial Settings
You can change the settings configured with Fax Setup Guide individually.
Changing Fax RX Mode and Setting the Action when Receiving a Fax(P. 268)
Changing the Fax Number and Unit Name(P. 270)
● The sender's information, including the sent date and time and fax number of the machine, is printed
together with the fax data at the destination. You can change the print position and the mark added to the
fax number or choose to not print this.
● To automatically forward or save sent and received faxes, you must configure separate settings.
Forwarding Faxes and Configuring the Backup Settings(P. 271)
Faxing
[TX Terminal ID](P. 496)
265
8Y8C-05F
Configuring the Fax Settings