Canon imageCLASS MF266dn II User Manual page 154

● Insert the paper until the edge of the paper is against the paper tray.
When Printing on the Back Side of Printed Paper (Manual 2-sided Printing)
Flatten the edge of the paper to remove any curls, and load the paper with the back (unprinted) side face up.
● You can use only paper printed with this machine.
● You cannot print on a side that has been previously printed on.
● If toner smudges and splatters appear on the back side, adjust the image quality.
Print (2-Sided Only)](P. 458)
5
Align the paper guides with the width of the paper.
Paper guides that are aligned but too loose or too tight can cause misfeeds or a paper jam.
6
Set the paper size and type.
Tray(P. 155)
By default, when the machine detects paper loaded in the multi-purpose tray, the screen for setting the
paper size and type is displayed on the control panel. Set the paper size and type each time you load paper.
When Loading A5 Size Paper
● Set the paper size according to the orientation of the loaded paper.
Landscape orientation (A5)
Basic Operations
Setting the Paper Size and Type for the Multi-purpose
Portrait orientation (A5R)
145
[Manual Back Side