Changing The Print Settings For Received Faxes - Canon imageCLASS MF266dn II User Manual

Changing the Print Settings for Received Faxes

Received faxes are printed on one side of the paper by default. You can change the settings to print on both sides of
the paper, and print the received date and time and page number.
Printing on Both Sides(P. 288)
Printing the Received Date and Time and Page Number(P. 288)
Printing on Both Sides
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings.
[Print on Both Sides](P. 501)
Administrator privileges are required.
1
Log in to Remote UI in System Manager Mode.
2
On the Portal page of Remote UI, click [Settings/Registration].
Remote UI(P. 400)
3
Click [RX/Forwarding Settings]
➠
The [Edit Basic Settings] screen is displayed.
4
Select the [Print on Both Sides] checkbox.
5
Click [OK].
➠
The settings are applied.
6
Log out from Remote UI.
Printing the Received Date and Time and Page Number
Select whether to print the following information at the bottom of received faxes:
● Reception date and time
● Received reception number
● Page number
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings.
[Print RX Page Footer](P. 500)
Administrator privileges are required.
Faxing
Starting Remote UI(P. 398)
[Fax RX Settings] [Edit] in [Basic Settings].
288
8Y8C-063
Portal Page of