Canon imageCLASS MF266dn II User Manual page 305

Select a fixed copy ratio from the list or select [Custom Ratio] and enter a custom ratio using the numeric
keys.
You can specify a value from 25% to 400% in 1% increments.
5
Configure the other copy settings, as needed.
You can perform 2-sided copying and adjust the image quality and other settings to suit your original and
purpose.
6
Press on the control panel.
➠
Copying starts.
● To cancel copying, press [Cancel]
● Press on the control panel to view the copy job status.
When [Scan Next: Press Start] appears
When an original is placed on the platen glass and copied using 2-sided copying or N on 1, the screen is
displayed for scanning the next original.
1
Place the next original on the platen glass, and press
➠
The next original is scanned, and the same screen is displayed.
Repeat this process until scanning of all originals is completed.
● You can press [Density] and [Original Type] to change the settings for each original.
● If the size of the original is different, part of the image may be missing, or the image may be printed
smaller on the paper.
2
Press [Start Copy].
➠
The scanned originals are printed.
5 Lines LCD Model
1
Place the original.
2
On the control panel, select [Copy] in the [Home] screen and press
Screen(P. 118)
➠
The copy screen is displayed.
3
Enter the number of copies using the numeric keys.
Copying
[Yes]. Canceling Copy Operations(P. 322)
Placing Originals(P. 137)
296
Additional Copying Features(P. 299)
Viewing the Print Job Status and Log(P. 221)
on the control panel.
. [Home]