Canon imageCLASS MF266dn II User Manual page 87

4
Restart the machine.
➠
The settings are applied.
Perform a connection test to check whether the IPv4 address is correctly configured.
Network Status and Settings(P. 94)
Checking the Currently Set IP Address
● On the screen in Step 3, select [Check Settings] and press
the IP address is displayed as "0.0.0.0," it is not correctly configured.
If the IP Address Is Changed after Installing the Printer Driver
● In Windows, you must add a new port.
- If you are using an MFNP port, the connection is maintained as long as the machine and computer belong
to the same subnet, so no action is required on the computer.
- If you are using a standard TCP/IP port, you must add a new port.
If you do not know which port is being used, see the following:
Viewing the Printer Port(P. 664)
● In macOS, you must re-register the machine on the Mac. For details about registering the machine, see the
manual of the driver at the online manual site.
https://oip.manual.canon/
* If you are using DHCP to automatically obtain the IP address of the machine, the IP address may be changed
automatically.
Setting Up
Restarting the Machine(P. 111)
Configuring a Printer Port (Windows)(P. 201)
78
to check the current IP address setting. If
Adding a Port(P. 201)
Checking the