Configuring Wins - Canon imageCLASS MF266dn II User Manual

Configuring WINS

When using the machine in a network environment that uses both NetBIOS and TCP/IP, configure Windows Internet
Name Service (WINS) to convert the NetBIOS name to an IP address.
To enable WINS, specify the WINS server. WINS cannot be used in an IPv6 environment.
This section describes how to configure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings.
[WINS Settings](P. 446)
Administrator privileges are required. The machine must be restarted to apply the settings.
Required Preparations
● Set the computer name and workgroup name.
Name(P. 86)
● Prepare the IPv4 address of the WINS server and keep it close by.
1
Log in to Remote UI in System Manager Mode.
2
On the Portal page of Remote UI, click [Settings/Registration].
Remote UI(P. 400)
3
Click [Network Settings]
➠
The [Edit WINS Settings] screen is displayed.
4
Select the [WINS Resolution] checkbox.
5
Enter the IPv4 address of the WINS server, and click [OK].
If the IP address of the WINS server is obtained from a DHCP server, the obtained IP address has priority.
Configuring DNS(P. 83)
6
Restart the machine.
➠
The settings are applied.
Setting Up
Setting the Computer Name and Workgroup
[WINS Settings]
Restarting the Machine(P. 111)
88
Starting Remote UI(P. 398)
[Edit].
8Y8C-022
Portal Page of