Using The Show Commands - Cisco WS-C2950SX-48-SI Configuration Manual

Configuring 802.1x Authentication on the Switch

Using the show Commands

You can use these show commands to access information about 802.1x authentication and its
configuration:
•
•
•
•
To display the usage options for the show port dot1x command, perform this task in normal mode:
Task
Display the usage options for the show port dot1x command. show port dot1x help
This example shows how to display the usage options for the show port dot1x command:
Console> (enable) show port dot1x help
Usage: show port dot1x [<mod[/port]>]
To display the values for all the parameters that are associated with the authenticator PAE and back-end
authenticator on a specific port on a specific module, perform this task in normal mode:
Task
Display the values for all configurable and current state
parameters that are associated with the authenticator PAE and
back-end authenticator on a specific port on a specific module.
This example shows how to display the values for all the parameters that are associated with the
authenticator PAE and back-end authenticator on port 1 on module 4:
Console> (enable) show port dot1x 4/1
Port
----- ------------------- ---------- ------------------- -------------
4/1
Port
----- ------------- -----------------
4/1
To display the statistics for the different types of EAP frames that are transmitted and received by the
authenticator on a specific port on a specific module, perform this task in normal mode:
Task
Display the statistics for the different types of EAP
frames that are transmitted and received by the
authenticator on a specific port on a specific module.
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
31-16
show port dot1x help
show port dot1x
show port dot1x statistics
show dot1x
show port dot1x statistics [<mod[/port]>]
Auth-State BEnd-State Port-Control
connecting finished
Multiple Host Re-authentication
disabled enabled
Chapter 31
Command
Command
show port dot1x mod/port
Port-Status
auto unauthorized
Command
show port dot1x statistics mod/port
—
Release 8.1
Configuring 802.1x Authentication
78-15486-01