Clearing Gvrp Statistics; Disabling Gvrp On Individual 802.1Q Trunk Ports; Disabling Gvrp Globally - Cisco WS-C2950SX-48-SI Configuration Manual

Configuring GVRP on the Switch

Clearing GVRP Statistics

To clear all GVRP statistics on the switch, perform this task in privileged mode:
Task
Clear GVRP statistics.
This example shows how to clear all GVRP statistics on the switch:
Console> (enable) clear gvrp statistics all
GVRP Statistics cleared for all ports.
Console> (enable)

Disabling GVRP on Individual 802.1Q Trunk Ports

To disable GVRP on individual 802.1Q trunk ports, perform this task in privileged mode:
Task
Step 1
Disable GVRP on an individual 802.1Q trunk port.
Step 2
Verify the configuration.
This example shows how to disable GVRP on 802.1Q trunk port 1/1:
Console> set gvrp disable 1/1
GVRP disabled on 1/1.
Console>

Disabling GVRP Globally

To disable GVRP globally on the switch, perform this task in privileged mode:
Task
Disable GVRP on the switch.
This example shows how to disable GVRP globally on the switch:
Console> (enable) set gvrp disable
GVRP disabled
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
13-8
Chapter 13
Command
clear gvrp statistics {mod_num/port_num | all}
Command
set port gvrp disable mod_num/port_num
show gvrp configuration
Command
set gvrp disable
—
Release 8.1
Configuring GVRP
78-15486-01