Chapter 15
Configuring Multicast Services
Leaves:10
Leave Alls:35
Empties:5
Fwd Alls:0
Fwd Unregistered:0
Total valid GMRP Packets Transmitted:600
Join Empties:200
Join INs:150
Leaves:45
Leave Alls:200
Empties:5
Fwd Alls:0
Fwd Unregistered:0
Total valid GMRP Packets Received:0
Total GMRP packets dropped:0
Total GMRP Registrations Failed:0
Console> (enable)
Clearing GMRP Statistics
To clear all GMRP statistics on the switch, perform this task in privileged mode:
Task
Clear GMRP statistics.
This example shows how to clear the GMRP statistics for all VLANs:
Console> (enable) clear gmrp statistics all
Console> (enable)
Disabling GMRP
To disable GMRP globally on the switch, perform this task in privileged mode:
Task
Disable GMRP globally.
This example shows how to disable GMRP globally:
Console> (enable) set gmrp disable
GMRP disabled.
Console> (enable)
Configuring Multicast Router Ports and Group Entries
The following sections describe how to manually specify multicast router ports and configure multicast
group entries.
78-15486-01
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
Configuring Multicast Router Ports and Group Entries
Command
clear gmrp statistics {vlan_id | all}
Command
set gmrp disable
—
Release 8.1
15-15