Setting The Dc Power Input; Setting The Power Budget For The Catalyst 4006 Switch - Cisco WS-C2950SX-48-SI Configuration Manual

Configuring Power Management

Setting the DC Power Input

To set the DC power input for the 1400 W DC power supply, perform this task in privileged mode:
Task
Step 1
Set the input wattage for the 1400 W DC power supply.
Step 2
Verify the configuration.
This example shows how to set the DC power input to 5000 W and confirm the setting:
Console> (enable) set power dcinput 5000
Console> (enable) show enviroment power
Total Inline Power Available: 4166.00 Watts (83.32 Amps @50V)
Total Inline Power Drawn From the System: 0 Watt
Remaining Inline Power in the System: 4166.00 Watts (83.32 Amps @50V)
Configured Default Inline Power allocation per port: 6.00 Watts (0.12 Amps @50V)
Module Total Allocated Max H/W Supported Max H/W Supported
To Module (Watts) Per Module (Watts) Per Port (Watts)
------ ----------------- ------------------ -----------------
2 0.00 830.562 15.400
3 0.00 830.562 15.400
4 0.00 830.562 15.400
5 0.00 830.562 15.400
6 0.00 830.562 15.400
DC Power supplies are configured for 5000Watts DC input
Power Budget is : 1 supply
Power Available to the System (excluding voice power): 1360 Watts (113.33 Amps @
12V)
Power Drawn from the System (excluding voice power): 485 Watts (40.42 Amps @12V)
Remaining Power (excluding voice power): 875 Watts (72.92 Amps @12V)
Console> (enable)

Setting the Power Budget for the Catalyst 4006 Switch

To set the power budget for the Catalyst 4006 switch, perform this task in privileged mode:
Task
Step 1
Set the power budget for the Catalyst 4006 switch.
Step 2
Verify the power budget and the current power usage for
the switch.
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
28-16
Chapter 28 Power Management
Command
set power dcinput
show environment power
Command
set power budget {1 | 2}
show environment power
—
Release 8.1
78-15486-01