Cisco WS-C2950SX-48-SI Configuration Manual page 347

Chapter 20 Checking Status and Connectivity
This example shows the basic usage of the traceroute command:
Console> (enable) traceroute 10.1.1.100
traceroute to 10.1.1.100 (10.1.1.100), 30 hops max, 40 byte packets
1 10.1.1.1 (10.1.1.1)
2 10.1.1.100 (10.1.1.100)
Console> (enable)
This example shows how to perform a traceroute with six queries to each hop with packets of 1400 bytes
each:
Console> (enable) traceroute -q 6 10.1.1.100 1400
traceroute to 10.1.1.100 (10.1.1.100), 30 hops max, 1440 byte packets
1 10.1.1.1 (10.1.1.1)
2 10.1.1.100 (10.1.1.100)
Console> (enable)
78-15486-01
1 ms
2 ms
2 ms
2 ms
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
2 ms 1 ms
2 ms 2 ms
2 ms 2 ms 1 ms 2 ms
4 ms 3 ms 3 ms 3 ms
Using IP Traceroute
2 ms
3 ms
—
Release 8.1
20-13