Cisco WS-C2950SX-48-SI Configuration Manual page 202

Configuring VTP Version 3
Console> (enable) show vtp domain
Version
Domain Name
Notifications: disabled
Feature
-------------- -------------- ----------- -------------- ----------------------
VLAN
UNKNOWN
Pruning
VLANs prune eligible: 2-1000
Console> (enable)
Disabling VTP Using the Off Mode
When you disable VTP using the off mode, the switch behaves the same as in VTP transparent mode
with the exception that VTP advertisements are not forwarded.
To disable VTP using the off mode, perform this task in privileged mode:
Task
Step 1
Disable VTP using the off mode.
Step 2
Verify the VTP configuration.
This example shows how to disable VTP using the off mode:
Console> (enable) set vtp mode off
Changing VTP mode for all features
VTP3 domain server modified
Because there is only the VLAN database in release 8.1(1), using the above example without specifying
Note
the vlan keyword results in the same configuration as using the vlan keyword.
Console> (enable) show vtp domain
Version
Domain Name
Notifications: disabled
Feature
-------------- -------------- ----------- -------------- ----------------------
VLAN
UNKNOWN
Pruning
VLANs prune eligible: 2-1000
Console> (enable)
Catalyst 4500 Series, Catalyst 2948G, Catalyst 2980G Switches Software Configuration Guide
9-26
: running VTP3
: server
Mode Revision
Transparent
Off
: disabled
: running VTP3
: server
Mode Revision
Off
Off
: disabled
Password : not configured
Switch ID : 00d0.004c.1800
Primary ID Primary Description
Command
set vtp mode off
show vtp domain
Password : not configured
Switch ID : 00d0.004c.1800
Primary ID Primary Description
—
Release 8.1
Chapter 9 Configuring VTP
78-15486-01